new

Methods to Get Long Service Life of Wood Pellet Machine

Published: Jan 29,2015 11:23:05

 

 Wood pellet machine is mainly applied to biomass material, make the biomass fuel pellets (wood pellet). The diameter of input materials is 2-6mm, the smaller the better. The moisture of raw materials is about 13%, the moisture of finished pellets is about 10%. The machines can be both with motor and diesel engine can satisfy the different customers' requirements. Professional wood pellet machine (http://www.woodpelletmillchina.com/pro/wood_pellet_mill.html) is on the basis of the circular motion of machinery, motor driven, driving gear delivered to spindle and dies, the friction of the roller's rotation so that pressing wheel and die between very high temperature, powdery friction materials through high-temperature viscosity, protein and lipid solidification degeneration in the roller's extrusion hole from die extrusion, then by a rejection of a wheel is made of particles by outlet sent out.

Wood and Wood Pellets

How to maintain wood pellet machine and prolong the life span of it, there are several ways, let’s take a brief introduction:

1. Please adjust screw M10 on the front bearing pawn to the proper spot when the roller shuttled front and back. Please adjust screwM10 back on the bearing frame to the proper spot if the gear shaft shuttled. The space should make the bearing soundless, and adjust the tightness of hand turning pulley. It may damage the machine weather it’s too tight or too loose.

2. Check up the gadget monthly especially the worm, gear, bolt on the lubricating block, the bearing and other mobile parts if it is flexible and the wear condition. Timely examine and repair the broken part. Please don’t use the machine reluctantly.

3 It is necessary to wipe up the whole body of the pellet making machine and wipe the surface with rust prevention oil if unused for a long time. Please cover the machine with tarpaulin.

4. It is necessary to take out the rotate roller and clean up or brush off the remaining content after using the machine or a pause. After that, install the roller for the next use.

5. Put the wood pellet machine in clean and dry condition. Please do not use it in acid condition or other corrosive atmospheres.

If you want to know the reason to choose wood pellet mill, welcome to contact or visit Fote Machinery: info@sinoftm.com.

Prev ↑ Describe Advantages of 2-3T/H Biomass Pellet Plant

Next ↓ Analyze Usage and Maintenance of Biomass Pellet Mill for Sale

Title: